Your home's central A/C can provide you and your family many years of comfort if properly maintained. Taking just little bit of time each month to perform a few easy tasks will help keep you're A/C running smoothly and efficiently.
Air Compressor
Compressor Casement
Air Compressor
On the outside of your home is the A/C's compressor compartment. Keep this clean year round and free of blockage by plants, etc. A dirty casement can put additional strain on your compressor and the rest of your system. Plants can also restrict the air flow around the component. Trim back any shrubs or other plants near the unit and use a garden hose to wash off the dirt and loose debris that will accumulate over time.
Ductwork
It is also important to remember to check your ducts about every other year. Sometimes the passages can become dirty and even partially clogged when not properly looked after.
Usage
Even though there are many energy-efficient machines available today, central A/C units can use a substantial amount of energy to run. One way to help keep your costs down is to not turn off your air conditioner in the summer. If you leave, it is better on a hot day to just turn up the thermostat a bit. If you turn off the A/C and allow the building to heat up, it will require more energy to cool the house back down again that it took to just leave it running.
Air Filter
Air filters at the intake/s should be checked once a month, and if it filter is dirty, it should be replaced. You should change your filter every three months, at the most. Reusable filters are available, which only need be washed out every month.
Changing your home's air filter at the appropriate times is vital to you and your family's health. Today's airtight homes do not allow for contaminates to escape building, allowing them to build up over time if not properly circulated. The air inside a home has been shown to at times be up to five times more deleterious to one's health than the air outside.
Hiring a Professional
Hiring a professional A/C technician to perform an annual maintenance check-up should be seriously considered. Qualified A/C techs require the necessary tools, skills, and experience to keep your home's A/C running efficiently, avoiding costly repairs in the future.
For a minimal charge, the technician will typically check the coils, compressor, belts, bearings, operating pressure and temperature, Freon level, and will oil the moving parts of the system.
Central Air Conditioner Maintenance
Air Compressor
Click for larger image and other views
>> Click here to update Cheapest prices for Makita MAC5200 Big Bore 3.0 HP Air Compressor <<
Makita MAC5200 Big Bore 3.0 HP Air Compressor Feature
- Folding handle: Low profile for easy storage with handle folded
- Rugged wheels: Job-site portability
- Built-in storage compartment; Conveniently stores air fittings and accessories
- Air hose wrap: Stores 50 feet of 3/8-inch air hose with handle folded or upright
- One-year manufacturer's warranty
Makita MAC5200 Big Bore 3.0 HP Air Compressor Overview
Whether you need a compressor for woodworking, painting, caulking or construction, this 5-gallon Makita is a great choice, primarily because of its impressive 6-1/2 cfm at 90 psi on a 13.8 amp draw and easy portability. Power and performance to run two framing nailers. Contractor air compressor features a low profile for easy storage (with handle folded), rugged wheels for jobsite portability, cast iron cylinders, industrial air filter, thermal overload protection and more. CFM at 90 PSI: 6.9, Max. PSI: 140, Volts: 115, Amps: 13.8, HP: 3, Air Tank Size (gal.): 5.2, Tank Description: Horizontal, Pump: Cast iron cylinder, oil-lubricated, Air Outlet Size (in.): 3/8, Portable or Stationary: Portable
Makita MAC5200 Big Bore 3.0 HP Air Compressor Specifications
Makita's 3.0 HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC5200 delivers industrial power and results with improved durability, and includes rugged wheels and folding handle for easy transport.
View larger |
|
| MAC5200 Features | | POWER - 6.5 CFM @ 90PSI; powerful enough to run two framing nailers | | PERFORMANCE - Cast-iron cylinder with greater bore and stroke for maximum performance | | DURABILITY - 8" pneumatic wheels make the compressor portable through any jobsite terrain | | CONVENIENCE - Oil drain and oil sight glass conveniently located for easy access and maintenance | | INCLUDES - Oil and 1/4" universal quick coupler |
|
| Tool Specifications |  | | Horsepower | 3.0 | | Pump | Oil-lubricated | | Tank | 5.2 gal. | | Performance | 90 PSI: 6.5 cfm
40 PSI: 6.9 cfm | | Maximum Pressure | 0 - 140 PSI | | AMPS | 13.8 | | Size | 29"x19"x19-1/2" | | Net Weight | 88 lbs. |
|
3.0 HP with Big Bore Engineered PumpThe MAC5200 is powered by a 3.0 HP motor with built-in thermal overload for additional protection. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC5200 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The 5.2 gallon tank sustains an operating pressure of 140 PSI and delivers 40PSI (6.9 CFM) and 90 PSI (6.5 CFM), enough for two nailers. The oil-lubricated pump runs cooler, and the finned discharge tubing dissipates heat more efficiently. The roll-cage construction is built for extra protection for the pump and motor assembly, helping it withstand harsh jobsite environments. Ease-of-use and convenience features include tool hangers, a built-in storage compartment for air fittings and accessories, and an air hose wrap to store 50 feet of 3/8-inch air hose with handle folded or upright. Other features include a convenient oil drain and oil sight glass, and a tank drain valve that supersedes standard petcock design for easier maintenance.
Versatile Design for a Range of Applications
The MAC5200 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC5200 is just another example of Makita's commitment to innovative technology and best-in-class engineering.
About Makita Big Bore Air Compressors
Makita Big Bore Air Compressors deliver higher output and less noise for improved job site performance. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. All Makita Big Bore Air Compressors are oil lubricated and equipped with large automotive style filters for increased air intake and greater efficiency. Makita Big Bore Air Compressors deliver industrial power and results with improved durability.
About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.
Warranty
Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.
What's in the Box
Makita MAC5200 3.0 HP Air Compressor, oil and 1/4-inch universal quick coupler.
SAVE NOW on the special offers below!
Available In Stock. |
| This Makita MAC5200 Big Bore 3.0 HP Air Compressor ships for FREE with Super Saver Shipping. |
|
Limited Offer Today!! Makita MAC5200 Big Bore 3.0 HP Air Compressor Black Friday and Cyber Monday Deals
Vanilla Protein Shake Supplement For Energy Toshiba Tablet Notebook
